Bathroom Privacy Shades & Blinds

A bathroom window has two jobs that pull against each other. You want daylight for getting ready, and you want nobody outside to see in, whether that is a neighbor across a side yard or the street at night when the lights are on. A heavy covering that stays down all day leaves the room dim. This collection gathers the shades and blinds we would put in a bathroom when privacy comes first, each made to the width and height you measure and shipped direct to you.

Shades and blinds that work in a bathroom

Top down bottom up cellular shades are the most useful single answer. The shade can be lowered from the top to let light in over the upper part of the window while the lower part, the part at eye level, stays covered. Choose a light filtering fabric if you want a soft glow, or blackout if the window faces a close neighbor or a streetlight.

Blackout roller shades are the simplest fully opaque option. The blackout fabrics in our roller range are rated at 100% blackout and are made from polyester, which handles humidity in a way natural fibers do not. A roller sits neatly in a small recessed window and rolls out of the way completely when you want the full view.

ZeroGlow is the option for a bathroom window you would rather not drill. It is a 25 mm blackout cellular shade held in an edge-to-edge frame that presses into the opening, with a cordless lift that travels either up and down or side to side. It comes in six fabric colors: White, Black, Beige, Light Gray, Dark Gray and Straw.

Faux wood blinds are here too for anyone who prefers a classic slatted look; order a sample to compare it with the fabric options at your own window. One thing we leave out on purpose is woven wood. Natural fibers are not suited to high-humidity rooms, and prolonged moisture can warp them.

Sizes to know before you order

Most bathroom windows are small, so minimum sizes matter more here than maximums. A cordless 38 mm cellular shade starts at 12 inches wide, and a top down bottom up cordless cellular shade can be as short as 8 inches high, which suits narrow and short windows. Cordless cellular reaches 94 inches high, and top down bottom up cordless reaches 98 inches wide. A blackout roller in our squared cassette can be built from 11 3/4 inches wide with a bead chain, or from 23 5/8 inches wide cordless, up to 94 1/2 inches wide. ZeroGlow is built to your opening in inches or millimetres, so measure the recess exactly.

Measuring and installing it yourself

Measure the width at the top, middle and bottom of the opening and the height on both sides, then use the smallest figure. For an inside mounted cellular shade the shade is made about 1/4 inch narrower than the opening so it clears the frame. For an outside mount, add about 3 7/8 inches to both width and height so the shade overlaps the glass and closes off light gaps at the edges, which matters for privacy at night.

Roller shades hang on a cassette bracket. You need a drill with a 6 mm (about 0.2 inch) bit, and two wall anchor types come in the box, so pick the one that matches your wall. Each bracket has four holes; two screws on opposite sides hold it on a standard wall. Hook the valance groove onto the bracket latch and press back until it clicks at the top and the rear.

ZeroGlow needs no drill at all. Join the frame corners on a soft, flat surface, apply the rubber weather strip around the outside edges, then position the frame in the opening and press the front gently into place.

If you are unsure which way to go, start with how the window is used. A window beside the shower or tub usually wants a top down shade so light still comes in from above. A small high window that only needs to go dark and stay private is a good fit for ZeroGlow or a blackout roller.