No-Drill Bathroom Shades & Blinds

A bathroom window is often the one you most want covered and the one you least want to drill. The frame may be tiled or vinyl, a lease may rule out new holes, and a frosted or street-facing pane still shows shapes once the lights are on at night. No-drill bathroom shades and blinds start from that constraint: privacy and darkness when you want them, with the walls and trim left exactly as you found them. Every shade on this page is made to the opening you measure and shipped direct.

No-drill shades for a bathroom window

ZeroGlow leads this page because it was designed around the no-drill idea. It is a 25 mm blackout cellular shade held inside a slim edge-to-edge frame, and the whole frame presses into the window opening. The lift is cordless, which keeps a small room free of loose cords, and you choose whether the shade travels up and down the glass or side to side. That second option is useful on a short, wide bathroom window, where you may want to uncover one end for daylight and keep the side nearest the shower closed.

The fabric comes in six colors, White, Black, Beige, Light Gray, Dark Gray and Straw, and the frame in three. For most bathrooms, match the frame to the window trim and the fabric to the wall so the shade disappears when it is open.

Light filtering and blackout cellular shades are the second route. A no-drill mount is offered as an add-on for our cellular shades, so you get the honeycomb profile without screws in the frame. Light filtering suits a bathroom where you want soft daylight while you get ready. Blackout suits one that doubles as a quiet, dark room for an early or late shower.

Woven wood is not on this page on purpose. Natural fibers are not suited to high-humidity rooms, and steam can warp the weave over time. Roller shades handle humidity well but mount on drilled brackets, so you will find them on our standard bathroom page instead.

Sizes and options to check

ZeroGlow is built to your opening in inches or millimetres, so measure the space the frame will press into rather than the glass alone. Because the shade is cordless and enclosed, there is no headrail or cord to plan around.

For a cordless cellular shade, the standard style builds from 12 to 94 inches wide and up to 94 inches high. A top down bottom up cellular shade on a cordless lift builds from 12 to 98 inches wide, with a minimum height of just 8 inches, which suits the short, high windows common over a tub. Top down bottom up is worth a look for bathrooms: lower the shade from the top for light and keep the lower part of the window covered.

For a cellular shade inside the frame, the shade is made 1/4 inch narrower than the opening to clear the frame. For an outside mount, add 3 7/8 inches to both width and height so the shade overlaps the frame and closes the light gap at the edges.

Installing without a drill

ZeroGlow goes up in three steps. Lay the frame on a soft, flat surface and join the corners. Fit the rubber weather strip around the outside edges of the frame, which gives a snug seal against the window opening. Then position the frame inside the opening and press the front of it gently into place. Expect a firm fit; that tension is what holds it.

Before you order, measure the width of the opening at the top, middle and bottom and the height on both sides, and use the smallest figures. Check that the opening is clear of handles, cranks or tile edges that would stop a frame from seating flat.

Choose ZeroGlow for full darkness and a frame that presses in, or a cellular shade with the no-drill mount for a softer look. Send us your sizes and we will make each one to measure and ship it direct to your door.