No-Drill Shades & Blinds

Made to your measurements. Designed for your room.

ZeroGlow™ Blackout Shades in Light Gray — a modest rental apartment bedroom, lightly furnished: a low upholstered bed with plain white and oat linen bedding, one wooden nightstand with a small lamp switched off, off-white builder-grade painted walls,

3 results

Find your solution

Drilling is the step that stops a lot of people from fixing a bad window. A lease may rule out new holes, the frame may be vinyl you would rather not crack, or you simply want a covering that can come with you when you move. No-drill shades and blinds start from that constraint. This page collects the made-to-measure options we build to go up without screws in the frame, so you can darken a bedroom or add privacy and leave the walls exactly as you found them.

ZeroGlow and cellular shades with a no-drill mount

ZeroGlow leads this page because it was designed around the no-drill idea. It is a 25 mm blackout cellular shade held inside a slim edge-to-edge frame, and the whole frame presses into the window opening. The lift is cordless, and you choose whether the shade travels up and down the glass or side to side. The fabric comes in six colors, White, Black, Beige, Light Gray, Dark Gray and Straw, and the frame comes in three. Because the frame closes off all four sides of the opening, it is the pick when the goal is a properly dark room: a nursery, a bedroom for shift work, or a rental with a streetlight outside.

Blackout cellular shades and light filtering cellular shades are the other route. On our cellular line a no-drill mount is offered as a $20 add-on per shade, so a standard cellular shade can go up without new holes. Choose blackout for sleep, and light filtering for a living room, kitchen or home office where you want soft daylight and privacy rather than darkness.

A few design notes. In a rental, a white or light gray shade sits comfortably against most landlord paint and trim, and it will suit the next place too. Keep one color across every window in a room so the frames read as a set rather than a patchwork. Black or Dark Gray ZeroGlow works well in a media room or a dark-painted bedroom, where you want the window to recede once the shade is closed.

What each option can fit

ZeroGlow is built to the size of your opening, and you can give us the measurements in inches or millimetres. It sits inside the window opening, so it suits windows with a recess around the glass rather than glass set flush with the wall.

A cordless cellular shade builds from 12 inches wide and 12 inches high up to 94 by 94 inches, which covers most bedroom and living room windows. For a wider window, a bead chain cellular shade starts at 18 inches wide and reaches 197 inches wide and 157 inches high. Motorized cellular needs at least 23 inches of width and stops at 79 inches high, so check both numbers before choosing a motor for a tall window. If you want the no-drill mount on a bead chain or motorized shade, ask us before you order.

Measuring and installing it yourself

Measure the width of the opening at the top, middle and bottom, and the height on the left and right, and write every number down. For ZeroGlow, send us the exact opening size and the frame is made to fit it. For a cellular shade mounted inside the frame, take 1/4 inch off the smallest width so the shade clears the frame. Measure each window on its own, even when two look identical.

Installing ZeroGlow takes three steps and no drill. Lay the frame on a soft, flat surface and join the corners. Fit the rubber weather strip around the outside edges of the frame, which is what seals it snugly against the opening. Then set the frame in the window and press the front of it gently until it is seated. Nothing is screwed into the wall or the trim.

Renting, sleeping through the day, or simply not ready to drill, there is a version here that fits the window you have. Send us the opening size for each window, tell us whether you want ZeroGlow or a cellular shade with the no-drill mount, and we will make each one to measure and ship it direct to your door.

A closer look, from every angle.

Explore shade styles, try fabrics, and see how they move before you choose.

How do I measure for my shades?

Choose an inside or outside mount first, then follow our shade measuring guide. Measure each window individually before entering your width and height on the product page.

Should I choose light filtering or blackout?

Light filtering fabric softens daylight. Blackout fabric blocks light through the fabric itself, while light can still enter around the edges. Your mount and any side tracks affect the final result. Solar and unlined woven fabrics have different privacy characteristics, so check the product details.

Can I add a motor?

Open the product configurator to see the controls and motor options offered for that shade. Motor and smart-home compatibility vary by product and the motor you select.