-
Wood Blinds From $49White, Snow White, Almost White, Alabaster, Natural, Maple, Golden Oak, Rosewood, Bourbon, Mahogany, Walnut, Chocolate, Dark Mahogany, Black +9 colorsShips
-
Faux Wood Blinds From $49Snow White, Cloud, Pearl, Eggshell, Oyster, Alabaster, Pebble, Fieldstone, Granite, Snow White (textured), Pearl (textured), Alabaster (textured), Birch (textured), Natural (textured), Hazelnut (textured), Cherry (textured), Almond (textured), Mahogany (textured) +13 colorsShips
-
Woven Wood Shades From $103Honey Cane, Shore Reed, Amber Loom, Pearl Reed, White Willow, Ash Reed, Carbon Reed, Frost Bamboo, Tobacco Rush, Cedar Stripe, Desert Mesh, Prairie Jute, Golden Loom, Dune Pearl +9 colorsShips
Find your solution
Wood and faux wood blinds are a common pick for privacy because the same slats that let daylight in can be closed to shut the view off. The questions that follow are practical: which finish suits the room, whether real wood or faux wood suits the window, and what to pair with them where the slats alone are not enough. This page groups our made-to-measure wood and faux wood blinds with the shades that cover the privacy situations blinds handle less well.
Wood, faux wood and the shades to pair with them
Wood blinds lead this page for rooms where wood already sets the tone, such as a study with a stained desk or a dining room with a wood table. You choose the size, color and configuration on the product page, and every blind is made to your measurements.
Faux wood blinds give the same slatted look with a painted finish. If you are matching painted trim, or want one blind on every street-facing window in the house, faux wood is the natural choice.
Woven wood shades are the wood-toned option without slats, and privacy there is a liner decision. Unlined weaves are about 50% see-through, a light filtering liner takes them to about 70%, and a blackout liner makes the shade fully blackout. A top down bottom up build lets you lower the shade from the top for daylight while the bottom stays closed at eye level.
Blackout cellular shades are on the page for the bedroom or bathroom where you want the view closed completely, with a honeycomb fabric in place of slats.
Some design guidance for privacy blinds. Match the finish to the largest wood surface in the room, usually the floor or a big piece of furniture, rather than to small accents. In a room with white trim, a white or soft white faux wood blind keeps the window crisp, while a mid tone real wood gives warmth without fighting the trim. Keep the same finish on every window you can see from the street, because privacy blinds are seen from outside as much as from in.
Sizes and options
Slat sizes, size limits and lift options for our wood and faux wood blinds are set on the product page as you configure each blind, so check the options there for your window. If a window is very wide, very tall or very narrow, send us the measurements and we will confirm the build.
The shades on this page have documented limits. Woven wood reaches 96 inches wide on every lift system, and a wider opening can take more than one shade on one headrail, up to 118 inches in total. Clutch loop starts at 11 3/4 inches wide and cordless at 19 3/4 inches. Cordless reaches 106 inches high, and clutch, wand and motorized lifts reach 118 inches. A top down bottom up woven wood shade cannot take a movable liner. Cordless blackout cellular shades run from 12 to 94 inches wide and up to 94 inches high, while a bead chain reaches 197 inches wide and 157 inches high.
Measuring and installing them yourself
For an inside mount, measure the opening width at the top, middle and bottom and use the smallest figure, rounded down to the nearest 1/8 inch. Measure the height on both sides the same way. Send the exact opening and let the factory make the deductions, and measure every window on its own, even in a matching row, because older frames are often a little out of square.
Check the frame depth before you choose an inside mount. Woven wood needs at least 1 5/8 inches inside the frame, and 2 1/8 inches for a cordless shade or 2 5/8 inches for clutch and motorized lifts to sit flush. If the frame is shallow, an outside mount above the window is the simpler route, and it also covers the edges where light and sightlines slip past.
Order samples to see each finish against your floor and trim in daylight, then send your sizes and we will make every blind and shade to measure and ship it direct to your door.
A closer look, from every angle.
Explore shade styles, try fabrics, and see how they move before you choose.
Loading visualizer…
How do I measure for my shades?
Choose an inside or outside mount first, then follow our shade measuring guide. Measure each window individually before entering your width and height on the product page.
Should I choose light filtering or blackout?
Light filtering fabric softens daylight. Blackout fabric blocks light through the fabric itself, while light can still enter around the edges. Your mount and any side tracks affect the final result. Solar and unlined woven fabrics have different privacy characteristics, so check the product details.
Can I add a motor?
Open the product configurator to see the controls and motor options offered for that shade. Motor and smart-home compatibility vary by product and the motor you select.