Roman Shades & Blinds for Kids Rooms

Made to your measurements. Designed for your room.

Blackout Roman Shades in Ivory — a child's bedroom for a roughly ten-year-old in a family home

2 results

  • Beige
    11
    White, Ivory, Beige, Gray, Black, Polar White, Silver Grain, Desert Tweed, Carbon Weave, Chalk Linen, Salt Gray, Toasted Linen, Pepper Linen, Night Slate, Ink Weave, Warm Ivory, Dove Gray, Steel Gray, Smoke Gray, Winter White, Biscuit, Mineral Gray, Stone Beige, Pure White, Cocoa Loom, Slate Loom +21 colors
  • A stack of cream-colored rectangular sheets or panels stacked vertically on a plain white background.
    8
    White, Ivory, Beige, Gray, Black, Alabaster, Graphite, Silver Linen, Silver Mist, Natural Flax, Driftwood, Onyx, Snow White, Oatmeal, Pebble, Cloud Gray, Linen Mist, Natural Taupe, Ash Gray, Frosted Pearl, Pale Stone, Champagne, Raw Linen, Ivory Fleck +19 colors

Find your solution

A child's room has to keep up with a lot. It goes to bed while the sky is still light in June, turns into a playroom on Saturday morning, becomes a homework spot with a laptop on the desk, and before long belongs to a teenager who wants it to look grown up. Roman shades and blinds for kids rooms handle all of that with a soft, tailored fabric face that folds into neat pleats when you raise it, so the window looks finished rather than fitted out. Every roman shade on this page is made to the width and height you measure and shipped direct to your door.

Blackout or light filtering roman shades

Blackout roman shades are the choice for the window beside the bed. The fabric blocks light fully, which helps on summer evenings when bedtime comes before sunset and on early mornings when the sun is up long before anyone should be. There are 30 blackout colors, from Dusk Rose and Lunar Glow to Moonstone Gray and Daybreak Linen, so you can go soft for a younger child or deep and moody for a teenager.

Light filtering roman shades suit a playroom, a reading nook or the window over a desk, where you want daylight without glare on a screen and without the street looking in. They come in 32 colors, including Canyon Clay, Sea Pearl and Alba Weave.

A design note: kids outgrow themes faster than they outgrow furniture. A calm neutral or a single soft color at the window lets you change bedding, posters and paint around it for years. Many families put blackout on the bed wall and light filtering on the second window.

Lift systems for a child's room

Cordless roman shades have no loose cords, which makes them child and pet safe, and there is nothing hanging beside a bunk bed or a toy shelf.

If you prefer a bead chain, it comes with a chain tensioner as standard.

A motorized roman shade takes the lift out of reach entirely. Run it from a remote, a wall switch or an app. The black six-channel remote supports timed control, so shades can close at bedtime and open for school mornings on a schedule. Each motor stores two end positions and up to four in between, handy for a half-lowered glare setting at homework time. A battery motor charges fully in about four hours.

Our roman shades are built in a squared cassette, either about 3 1/2 inches or 2 15/16 inches square, so check that the frame or the wall above the window has room for it.

Measuring and installing them yourself

For the darkest bedroom, mount the shade outside the frame so it overlaps the opening on each side and closes the thin light gap an inside mount leaves at the edges. An inside mount sits within the frame and looks tidier on a playroom or desk window. Measure each window on its own, taking the width at the top, middle and bottom and the height on both sides.

Roman shades hang on two cassette brackets. Drill with a 6 mm (0.2 inch) bit, set the screws at 1.1 inch spacing and use the supplied anchor that matches your wall. Each bracket has four pre-drilled holes, and in a room where shades get tugged, use all four. Hook the valance groove onto the bracket latch, press it back until it clicks, and check that the top and rear are both locked before you let go.

Order a blackout and a light filtering fabric sample, hold them up at bedtime and after school, and pick the pair that suits how your child actually uses the room.

A closer look, from every angle.

Explore shade styles, try fabrics, and see how they move before you choose.

How do I measure for my shades?

Choose an inside or outside mount first, then follow our shade measuring guide. Measure each window individually before entering your width and height on the product page.

Should I choose light filtering or blackout?

Light filtering fabric softens daylight. Blackout fabric blocks light through the fabric itself, while light can still enter around the edges. Your mount and any side tracks affect the final result. Solar and unlined woven fabrics have different privacy characteristics, so check the product details.

Can I add a motor?

Open the product configurator to see the controls and motor options offered for that shade. Motor and smart-home compatibility vary by product and the motor you select.