Thermal Blackout Blinds

Made to your measurements. Designed for your room.

ZeroGlow™ Blackout Shades in Beige — a quiet adult bedroom on a bright winter morning: soft greige painted walls, pale oak floor, a low upholstered bed with white and oatmeal linen bedding against the left wall, a wool throw at the foot, a slim walnut

4 results

  • ZeroGlow Blackout Shade — black fabric, angled view
    510
    +1 color
  • Gray honeycomb
    40
    White, Light Gray, Gray, Black, Straw, Wheat +1 color
  • Black
    36
    White, Ivory, Beige, Gray, Black, Polar White, Silver Grain, Desert Tweed, Carbon Weave, Chalk Linen, Salt Gray, Toasted Linen, Pepper Linen, Night Slate, Ink Weave, Warm Ivory, Dove Gray, Steel Gray, Smoke Gray, Winter White, Biscuit, Mineral Gray, Stone Beige, Pure White, Cocoa Loom, Slate Loom +21 colors
  • Beige
    11
    White, Ivory, Beige, Gray, Black, Polar White, Silver Grain, Desert Tweed, Carbon Weave, Chalk Linen, Salt Gray, Toasted Linen, Pepper Linen, Night Slate, Ink Weave, Warm Ivory, Dove Gray, Steel Gray, Smoke Gray, Winter White, Biscuit, Mineral Gray, Stone Beige, Pure White, Cocoa Loom, Slate Loom +21 colors

Find your solution

Blackout and warmth are usually bought as two separate problems, yet in a bedroom they often show up together. The window that lets the streetlight in is also the one that turns the room cold at night and hot by mid afternoon. Thermal blackout blinds handle both at once: a fully opaque fabric that covers the glass completely when it is down. This page is led by ZeroGlow, our framed blackout shade, and rounds out with the other Coverly blackout systems for rooms where a frame is not the right fit. Everything is made to measure and shipped direct to you.

Choosing a thermal blackout blind

ZeroGlow blackout shades lead the page. ZeroGlow is a 25 mm cellular shade in blackout fabric, held in an edge-to-edge frame instead of hanging free from a headrail. A rubber weather strip runs around the outside of the frame so it sits snugly against the sides of the opening, and ZeroGlow is listed as energy efficient. It is cordless, and you choose whether the shade travels up and down the glass or side to side.

Blackout cellular shades give the same honeycomb construction on a conventional headrail, with cordless, bead chain or motorized lifts. On our 38 mm cell, a cell-in-cell construction adds a second cell inside the first for an extra layer of fabric.

Blackout roller shades are the flat, minimal choice. Every fabric is 100% blackout, and most weigh between 265 and 430 grams per square meter.

Blackout roman shades hang as a smooth panel when lowered and gather into soft folds when raised, which suits a bedroom or nursery that wants a dressed, tailored window.

A design note: on a cold north facing window, a lighter fabric keeps the room from feeling closed in during the day, while Black or Dark Gray ZeroGlow suits a media room where the window should disappear.

What sets the limits

ZeroGlow is built to your opening in inches or millimetres. The fabric comes in White, Black, Beige, Light Gray, Dark Gray and Straw, and the frame in three colors.

Blackout cellular sizes depend on the lift. Cordless reaches 94 inches wide and 94 inches high. Bead chain reaches 197 inches wide and 157 inches high. Motorized on the 38 mm cell is capped at 79 inches high, so a tall window needs bead chain.

Blackout roller fabric is milled on narrower rolls than light filtering fabric, so blackout rollers reach 94 and a half inches wide on our squared cassette and 86 inches on our other cassettes. Any roller over 100 inches high moves to a larger 43 mm tube and the large cassette. A window wider than the limit takes two shades.

Measuring and installing

ZeroGlow needs no drill. Lay the frame on a soft, flat surface and join the corners. Fit the rubber weather strip around the outside edges of the frame. Then set the frame inside the window opening and press the front of it gently into place. Because it presses into the opening, measure the inside of the recess carefully.

Roller and roman shades mount on brackets with a 0.2 inch (6 mm) drill bit, and both drywall and masonry anchors are supplied. Screw each bracket through two of its four holes on opposite sides, hook the cassette onto the latch, press back until it clicks, and confirm the top and rear are both locked.

If you are unsure where to start, try ZeroGlow in the bedroom where light and drafts bother you most, then match the remaining windows in the same color so the room reads as one.

A closer look, from every angle.

Explore shade styles, try fabrics, and see how they move before you choose.

How do I measure for my shades?

Choose an inside or outside mount first, then follow our shade measuring guide. Measure each window individually before entering your width and height on the product page.

Should I choose light filtering or blackout?

Light filtering fabric softens daylight. Blackout fabric blocks light through the fabric itself, while light can still enter around the edges. Your mount and any side tracks affect the final result. Solar and unlined woven fabrics have different privacy characteristics, so check the product details.

Can I add a motor?

Open the product configurator to see the controls and motor options offered for that shade. Motor and smart-home compatibility vary by product and the motor you select.