-
Zebra Shades From $59Pearl Stripe, Sand Stripe, Cocoa Stripe, Silver Stripe, Espresso Stripe, Graphite Stripe, Navy Stripe, Lunar Gray, Soft Cream, Camel, Slate, Bronze, Merlot, Deep Teal, Marine Blue, Jet Black +11 colorsShips
-
Light Filtering Roller Shades From $49White, Ivory, Beige, Gray, Black, Alabaster, Graphite, Silver Linen, Silver Mist, Natural Flax, Driftwood, Onyx, Snow White, Oatmeal, Pebble, Cloud Gray, Linen Mist, Natural Taupe, Ash Gray, Frosted Pearl, Pale Stone, Champagne, Raw Linen, Ivory Fleck +19 colorsShips
-
Blackout Roller Shades From $59White, Ivory, Beige, Gray, Black, Polar White, Silver Grain, Desert Tweed, Carbon Weave, Chalk Linen, Salt Gray, Toasted Linen, Pepper Linen, Night Slate, Ink Weave, Warm Ivory, Dove Gray, Steel Gray, Smoke Gray, Winter White, Biscuit, Mineral Gray, Stone Beige, Pure White, Cocoa Loom, Slate Loom +21 colorsShips
Find your solution
Zebra shades are the window covering for people who like a modern room to stay calm. A zebra shade is made from fabric with alternating sheer and solid bands. Set the bands one way and the window is covered; set them another and soft light comes through while the room stays private. You get the light control people want from a blind, without slats or a busy stack of hardware at the top. Modern zebra shades and blinds lean into that: flat banded fabric, a squared cassette that hides the roll, and colors that sit back rather than shout. If you want clean horizontal lines without the clatter of slats, this is where to start.
Modern zebra options
The heart of this page is our zebra shade, offered in 16 colors. For a modern room, the Modern series is the natural fit: Modern Frost, Modern Pearl, Modern Sand, Modern Stone, Modern Ash, Modern Drift and Modern Onyx. Frost and Pearl keep a white room bright and airy. Sand, Stone and Drift warm up gray floors and concrete. Ash and Onyx give a sharp graphic stripe against a pale wall. The Zebra series adds deeper and bolder choices such as Slate, Indigo, Obsidian, Eclipse and Fire for a feature window.
We also include two flat roller shades for rooms where you want the same squared cassette and clean face with no banding at all:
- Light filtering roller shades for a plain, softly glowing panel in a living room or office.
- Blackout roller shades for bedrooms that sit alongside zebra shades elsewhere in the house, so the hardware matches room to room.
Cassette, colors and controls
Zebra shades are made on a cassette only. There is no open-roll zebra, so the fabric roll is always enclosed in a squared aluminum housing, which is a large part of why they look so tidy. A few details to plan around:
- Minimum width. Zebra shades start at 18.8 inches wide, so very narrow side lights are better served by a roller shade.
- Cassette and bottom bar colors. White, beige, grey or black. Match white to white trim for a cassette that disappears, or go black on a black window frame for a crisp modern edge.
- Controls. A continuous bead chain with a chain tensioner, cordless lift with no loose cords, a rechargeable powerwand, or a smart motor that runs from a remote, a wall switch or an app and works with Alexa, Google Home and Apple HomePod.
For a modern room, cordless or motorized keeps the window face clear of chains entirely. See our cordless zebra shades and motorized zebra shades pages if one of those is already your plan.
DIY install and measuring
Zebra shades use the same cassette bracket system as our roller and roman shades, and it is a straightforward install.
- Tools. A drill with a 0.2 inch (6 mm) bit. Two types of wall anchor come in the box, one for drywall and one for masonry. Use the one that matches your wall.
- Brackets. Each bracket has four pre-drilled holes. Two screws on opposite sides hold it on a normal wall. Use all four on a weak wall, on a wide shade, or above a door or stairwell.
- Hang it. Hook the groove at the top of the cassette onto the bracket latch, then press the cassette back until it clicks. Check that both the top and the rear are locked before you let go. The steps are the same for inside and outside mounts.
- Taking it down. Press the metal washer at the back of the bracket and the cassette releases. Do not pry it off from the front.
Measure carefully and decide on inside or outside mount before you order. Inside mount gives the flush, built-in look that suits a modern room best when the window has enough depth.
On design, keep it simple. Run the same color across every window on a wall, align the cassettes at one height and let the stripes do the talking. Every shade here is made to measure and shipped direct to your door.
A closer look, from every angle.
Explore shade styles, try fabrics, and see how they move before you choose.
Loading visualizer…
How do I measure for my shades?
Choose an inside or outside mount first, then follow our shade measuring guide. Measure each window individually before entering your width and height on the product page.
Should I choose light filtering or blackout?
Light filtering fabric softens daylight. Blackout fabric blocks light through the fabric itself, while light can still enter around the edges. Your mount and any side tracks affect the final result. Solar and unlined woven fabrics have different privacy characteristics, so check the product details.
Can I add a motor?
Open the product configurator to see the controls and motor options offered for that shade. Motor and smart-home compatibility vary by product and the motor you select.